TSD-series
- Program control via touch panel
- Automatic defrost
- Overheat protection
- Operating hours counter
- Mobile design
- 2 Stainless steel test specimen basket
- Cable port ø 100 mm
With a chamber volume of 100 litres, the two-zone thermal shock chamber ESPEC TSD-101 W can accommodate larger test specimens with a weight up to 30 kg.
The test chamber complies with all applicable standards according to MIL STD, IEC, JASO and EIA.
The built-in trigger function for the test specimen temperature detects the temperature directly on the test specimen and thus enables shorter testing times. Even during the temperature balance, the temperature is distributed uniformly so that the test specimens are subjected to even loads.
If chamber volumes of approximately 11 or 22 litres are insufficient, we recommend the ESPEC TSE-series thermal shock test chambers. With the ESPEC TSA-series, we also offer thermal shock test chambers with a fixed test chamber for 3-zone shock tests.
Thermal shock chamber TSD-101 W
| Type | Inside capacity |
Temperature range | Inside dimensions W x H x D in mm |
Outside dimensions W x H x D in mm |
| TSD-101 W | 100 l | Hot chamber: +60 to +205 °C Cold chamber: -77to 0 °C |
710 x 345 x 410 | 1100 x 1885 x 1965 |
| You can find information about current trends and developments in environmental simulation here. |
||
 |
 |
 |
